Vacuum

BAGGING FILM 350F ROLL This film rsists temperatures up to 350 degrees, is puncture resistant and strong. Do not count on any bagging film stretch. Meets the contours of the mold. You must ensure the full depth coverage within the mold. Part # 95010 Qty: Our Price:$546.52

BAGGING FILM 350F 100 YDS The vacuum bag forms half of the airtight envelope around the laminate. The vacuum bag should always be larger than the mold and allow for the depth of the mold. When a bag wider than the standard width is needed, a larger bag can be created by splicing two or more pieces together with mastic sealant or sealant tape. Size 100 yds Part # 95013 Qty: Our Price:$546.52

BREATHER CLOTH 4 OZ 10 YD A breather (or bleeder) cloth allows air from all parts of the envelope to be drawn to a port or manifold by providing a slight air space between the bag and the laminate. Breather fabric is lightweight polyester blanket that provides air passage within the vacuum envelope and absorbs excess epoxy or resin. Size: 4 oz Part # 95016 Qty: Our Price:$27.10

BREATHER CLOTH 4OZ 100 YD A breather (or bleeder) cloth allows air from all parts of the envelope to be drawn to a port or manifold by providing a slight aire space between the bag and the laminate. Breather fabric is lightweight polyester blanket that provices air passage within the vacuum envelope and absors excess epoxy or resin. Size 4 oz Part # 95018 Qty: Our Price:$210.40

BREATHER CLOTH 4OZ 25 YD Breather (or bleeder) cloth allows air from all parts of the envelope to be drawn to a port or manifold by providing a slight air space between the bag and the laminate. Breather cloth is a lightweight polyester blanket that proivides air passage within the vacuum envelope and absors excess epoxy/resin. Size 25 yds Part # 95017 Qty: Our Price:$67.75

BREATHER CLOTH 4OZ ROLL This high fill non-woven polyester will easily conform closely to the contours of your part. Allows air from all parts of the envelope to be drawn to a prot or manifold by providing a slight air space between the bag and laminate. Size: 4oz roll Part # 95015 Qty: Our Price:$210.40

PEEL PLY /TRACER 10 YDS Peel ply release fabric is a smooth woven fabric that will not bond to resin or epoxy. It is used to separate the breather and the laminate. Excess epozy/resin can wick through the release fabric and be peeled off the laminate after the laminate cures. It will leave a smooth textured surface that, in most cases can be bonded to without additional preparation. Size: 10 yds Part # 95001 Qty: Our Price:$46.50

PEEL PLYW/TRACER 100 YD Peel ply fabric is a smooth woven fabric that will not bond to epoxy/resin. It is used to separate the breather and the laminate. Excess epozy/rein can wick through the release fabric and be peeled off the laminate after the laminate cures. It will leave a smooth textured surface that, in most cases, can be bonded to without additional preparation. Size: 100 yds Part # 95003 Qty: Our Price:$465.00

PS TAPE 1" X 72 YDS When a bag wider than the standard width is needed, a larger bag can be created by splicing two or more pieces together with PS tape. Size: 72 yds Part # 95022 Qty: Our Price:$10.48

PS TAPE300F 1"X72 YDS PS tape is used to create the size of bag needed for the mold. Size: 72 yds Part # 95021 Qty: Our Price:$10.48

Next >     Jump to page: 1 2   New Category    Check out